Описание

Solder-splash-preventing rotary tip cleaner
Level of solder removal can be adjusted using two different types of brushes. It also reduces the oxidation of tips
Brushes can be replaced without using any tools, and safe design prevents solder wastes from entering drive part

Tip cleaner having both wire-type and sponge-type advantages
	Prevents solder from splashing when cleaning.
	· Inserting just the tip into the receptacle completely prevents solder from splashing.

	Two-types of brushes control how much solder is removed.
	· Solder removal status can be adjusted by plastic brushes and metallic brushes.
	With wire-type cleaners, excessive amounts of solder remain on the tip, which causes solder to splash when soldering. With sponge-type cleaners, oxidation is promoted, which causes shorter tip life. · A tip cleaner with both wire-type and sponge-type advantages eliminates the above problems when soldering.

	Comparison of how much solder is removed by the different cleaning methods<
	* The photos show the iron tips T12-D24.
	Enlarged images of cleaning brushes

	Minimizes decrease in temperature of the tip while cleaning.
	· Inserting the tip turns the brush automatically; no need to switch it on and off. · Reduces the tip cleaning time between soldering works to increase work efficiency. · The electric rotary cleaner provides a uniform final cleaning status with no differences between individuals.

Comparison of decrease in tip temperature by cleaning method

If decrease in temperature is small, the time for a single cleaning also becomes short. Because cleaning is performed many times per day, the overall working time can be also shortened.

Time for single cleaning (The time for a single cleaning is measured as the time until the tip temperature reaches the set temperature after cleaning.)

HAKKO FT-710	Approx. 2.3 sec. (reference value)
Wire-type HAKKO 599B	Approx. 2.9 sec. (reference value)
Cleaning sponge	Approx. 6.0 sec. (reference value)

	The low-noise design relieves stress due to noise during work.
	* This cleaner is very quiet in comparison with competitor's electric tip cleaner.
	Easy to maintain
	· Easy-to-replace brushes
	→ Brushes can be replaced without removing any screws.
	· Solder left inside is stored in "Solder waste collector".
	→ Solder does not splash all over the inside of the main body.
	· Safe design prevents brushes from turning unexpectedly during replacement.
	→ The brush cannot be replaced unless the AC adapter is unplugged.

	This tip cleaner can be attached to HAKKO iron holders HAKKO FH-101, FH-200 and FH-201.
	· This tip cleaner can be attached to any of the above 3 iron holders using just 2 screws. For other iron holders, this tip cleaner can be placed next to the iron holder.

	* The HAKKO FT-710 itself cannot be used as an iron holder. Be sure to use it together with an iron holder.

Category	Title
How to use	Cleaning mechanism
How to use	How to ground the HAKKO FT-710
How to use	Combinations of the HAKKO FT-710 and iron holders

Packing List

* Some soldering irons or tip shapes are NOT available. Please check 'Specification' if your soldering iron or tip shapes are available.

Part No.	Packing List
FT-710	HAKKO FT-710, AC adapter, Receptacle A and B, Lock nut, Solder waste collector, Gauge, Instruction manual

NOTE: Optional Part Receptacle C being purchased, HAKKO 917(Discontinued) (Station HAKKO 938(Discontinued)) and HAKKO FX-8301(Station HAKKO FX-838) are also available.

Specifications

Model No.	FT-710
Rating	DC 24 V 130 mA
Brush rotational speed	2,500rpm
Standard receptacle	Receptacle A and B
Dimensions	71(W)×77(H)×107(D) mm
Weight	450g

・AC Adapter

Output voltage	DC 24 V

Applicable Soldering Iron List

Receptacle	Soldering tip	Unusable shape	Custom-ordered shape	Soldering iron
Receptacle A	T7 series	T7-JL02 Spatula	T7-KF	HAKKO FM-2027 Station: HAKKO FM-202 (Discontinued)
	T11 series	-	-	HAKKO FX-901
	T12 series	T12-JL02 Quad Tunnel Spatula	T12-WB2 T12-WD08 T12-WD12 T12-WD16 T12-WD52 T12-WI T12-DL52 T12-KF	HAKKO FM-2027/2028 for Japan, Oceania, Asia & Other countries Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
	T15 series	T15-XD15 T15-JL02 T15-JD14 T15-JD16 T15-R48 Quad Tunnel Spatula	T15-1603 T15-1605 T15-BC15 T15-BC28 T15-CF2 T15-CF3 T15-SB03	HAKKO FM-2027/2028 for North America & EU. Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
Receptacle B	T14 series	-	-	HAKKO 957 (Discontinued)
	T18 series	-	-	HAKKO FX-8801 Station: HAKKO FX-888 (Discontinued), HAKKO FX-888D
	T34 series	-	-	DASH:FX-650 series
	900 M series	900M-T-H 900M-T-1.8H	900M-T-LB 900M-T-1.2LD	HAKKO 900 Type Medium HAKKO 907 Station: HAKKO 928 (Discontinued), HAKKO 936 (Discontinued), HAKKO 937 (Discontinued) etc.
Receptacle C (Optional Part)	T10 series	-	T10-J02 T10-K T10-KL T10-KU T10-LB T10-LI	HAKKO 917 (Discontinued) Station: HAKKO 938 (Discontinued)
	T13 series T17 series	-	-	HAKKO FM-2026 Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc.
	T20 series	-	T20-K T20-KU T20-BL T20-BL2 T20-BL3	HAKKO FX-8301 Station: HAKKO FX-838
	T22 series	-	T22-C3 T22-BL T22-BL2 T22-D45 T22-J02 T22-K	HAKKO FM-2030, HAKKO FM-2031 Station: HAKKO FM-206
Receptacle, custom-designed	T19 series	-	-	HAKKO FX-8805 Station: HAKKO FX-889
	T33 series	T33-BC2 T33-BC3 T33-BC4 T33-BC5 T33-BC6 T33-D24 T33-D32 T33-D5 T33-D6 T33-1610 T33-1611	T33-SSBC2 T33-SSBC3 T33-SSBC4 T33-SSBC5 T33-SSD24 T33-SSD32 T33-SSD16 T33-SSD6 T33-SS1610 T33-SS1611	HAKKO FX-8802 Station: HAKKO FX-801
	PRESTO series	-	-	HAKKO PRESTO

	*Soldering iron other than listed above (HAKKO FX-100, HAKKO FM-2032, Built-in solder feed type, Nichrome heater type and HAKKO 455/456), and Desoldering / Rework are not available.

Replacement parts

	Part No.	Name	Specifications
	B3523	Lock nut
	B3517	Receptacle A
	B3518	Receptacle B
	A1566	Cleaning brush A (plastic brushes, qty 2)
	B3521	Solder waste collector
	B3520	Pulley belt

*Some soldering irons and tip configurations cannot be used with receptacles A/B. Be sure to confirm applicable soldering irons and tip configurations from the applicable soldering iron list.
* Optional Part Receptacle C being purchased, HAKKO 917 (Station HAKKO 938) and HAKKO FX-8301(Station HAKKO FX-838) are also available.

Options

	Part No.	Name	Specifications
	A1567	Cleaning brush B (metal brushes, qty 2)
	B3519	Receptacle C

*Some soldering irons and tip configurations cannot be used with receptacles A/B.
Be sure to confirm applicable soldering irons and tip configurations from the applicable soldering iron list .

Maintenance

Category	Title
How to use	Cleaning mechanism
How to use	How to ground the HAKKO FT-710
How to use	Combinations of the HAKKO FT-710 and iron holders
Maintenance	Day-to-day cleaning
Maintenance	Maintenance and replacement frequency of the cleaning brush
Maintenance	Why can no solder be removed?

Video

Preview	Title
	how to clean a tip

Hakko FT-710. Rotary Tip Cleaner

Производитель: Hakko
Модель: FT-710
Наличие: По запросу

Цена - по запросу

Количество