• Hakko FS-100

  • Chemical paste best suited for the removal of oxidation on soldering iron tips
  • Also used for retinning of soldering tips

Chemical Paste
For retinning soldering tips
For oxidation removal on soldering tips
Re-tinning procedure
* Use FS-100 in combination with HAKKO FT-700 for enhanced effectiveness.
* Do not use the chemical paste for purposes other than restoring of the soldering tip.


Oxidized tip

Re-tinning is now completed.
* To prevent oxidation, supply efficient solder to the tip when soldering work is completed.

Tin the tip.

Clean off FS-100 paste from tip surface with a cleaning sponge or cleaning wire.

Check if the tip surface gets wet or not.

Repeat the process twice or more until the tip surface gets wet.

Use example of FS-100
Specifications
Model No. FS-100
Amount 10g
Ingredients Flux, tin(Sn) 50wt%(each)

* The flux component of chemical paste consists of Alicyclic amine hydrobromate, Aliphatic amine hydrobromate, Petrolatum,Wax. Make sure to clean off FS-100 paste from tip surface after tinning it.
* Do not use the chemical paste for purposes other than restoring of the soldering tip.

Cleaning procedure with HAKKO FS-100
Maintenance
Category Title
Maintenance If solder does not flow onto the tip...

Hakko FS-100

  • Производитель: Hakko
  • Модель: FS-100
  • Наличие: по запросу
  • Цена - по запросу