• Hakko FR-400. Desoldering Tool with Built-in Vacuum Pump 300W

  • Heavy-duty Desoldering Tool with built-in vacuum pump
  • Quick and secure desoldering even on high heat capacity and high heat dissipation PWB with super power
  • Secure desoldering with valve function
  • Solder clogging was reduced featuring Anti Clogging Function

300 W tremendous power enables nearly impossible desoldering on PWB with high heat capacity and high heat dissipation property.

300 W tremendous power makes incredible heating.

Secure desoldering, valve function that suctions with high pressure

Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.

Reduction of solder clogging

Improvement in heating core

Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging.



Featuring ACF (Anti Clogging Function)

ACF ensures suctioned solder be carried to filter pipe by keeping pump running for a second after releasing trigger.

Improvement in maintainability

Featuring new filter pipe 3 times larger than the previous model

The new filter pipe is 3 times larger than the previous model and applicable to operation on large components. This is not disposal type and for repeatable use.

Easy heater replacement

Easy heater replacement by removing 3 screws on the part of heating core.

Tool box for maintenance kit

A tool box that contains of maintenance tools such as cleaning pins for nozzle and heating core is provided for standard. The box can be set on the top of the unit for the convenience of use.

Larger filer and more transparency

When desoldering, flux is also suctioned. Flux can cause degradation of suction performance if it enters inside the pump. To avoid the degradation, filter is attached on the front panel. The new filter is larger than the previous type to enhance greater adsorption property. Also the transparent filter cover makes it easy to check filter condition.

Featuring a large LCD display

Very easy to see temperature on the large LCD display
Vacuum indicator to check clogging

Lineup of nozzles for large components

Nozzles applicable to shapes like 2 mm or larger diameter lead or flat termination are lined up.

Click here for more information about nozzles of N60 series.

Packing List
Model No. Packing List
FR-400(w/No.FR-4003) Station, Desoldering tool(FR-4003), Power cord, Iron holder (with cleaning wire), Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater, Cleaning drill for ø1.0 mm, Nozzle wrench, Filter [qty 2], Ceramic paper filter [qty 4]), Instruction manual
Specifications
Model No. FR-400(Desoldering tool: FR-4003)
Power consumption 320W
Temperature range 350 to 500ºC
Temperature stability ±5ºC at idle temperature

・Station

Output voltage AC 29V
Vacuum generator Vacuum pump, double cylinder type
Vacuum pressure Max. 80kPa (600mmHg)
Suction flow 15L/min.
Dimensions 166(W)×137(H)×264(D)mm
Weight 5.7kg

・Desoldering Tool

Power consumption 300W (29V)
Nozzle to ground resistance <2Ω
Nozzle to ground potential <2mV
Heating element Composite heater
Standard nozzle Φ1.0mm type (No.N60-02)
Cord length 1.2m
Total length 183mm (with Φ1.0mm nozzle)
Weight 270g (with Φ1.0mm nozzle)

* The suction flow is measured at the filter case suction port of station.
* Total length and weight (w/o cord, hose)

Replacement parts
Part No. Name Specifications
FR4003-81 Desoldering tool FR-4003
* The replacement for FR4001-81.
300W (30V)
A5054 Heating element 300W (30V), for FR-4003
B5079 Enclosure pipe for FR-4001
B5184 Filter pipe assembly
* The replacement for B5081.
with ceramic paper filter and related parts
B5081 Filter pipe assembly
* Discontinued. The replacement is "B5184".
with ceramic paper filter and related parts
A5045 Ceramic paper filter for FR-4001 (qty 10)
* The replacement for A5019.
A5019 Ceramic paper filter (qty 10)
* Discontinued. The replacement is "A5045".
B5080 Pre-filter
A5017 Front holder
A5018 Filter holder
A5020 Filter (qty 10)
A1013 Diaphragm (qty 2)
A1014 Valve plate (qty 2)
C5011 Tool box
B5082 Nozzle wrench
B1087 Cleaning pin nozzle Φ1mm
B1215 Cleaning pin heating element
B1303 Cleaning drill nozzle Φ1mm
B1306 Drill holder nozzle Φ0.8/1mm
B1309 Drill (nozzle Φ1mm, qty 10)
599-029 Cleaning wire
FH400-82 Iron holder <w/ cleaning wire>
Options
Part No. Name Specifications
C5045 Nozzle quick changer for FR-4003
B5227 Receptacle for C5045
B5229 Oval nozzle positioning jig
FH400-81 Iron holder <w/ cleaning sponge>
A1519 Cleaning sponge yellow
B1086 Cleaning pin nozzle Φ0.8mm
B1088 Cleaning pin nozzle Φ1.3mm
B1089 Cleaning pin nozzle Φ1.6mm
B1302 Cleaning drill nozzle Φ0.8mm
B1304 Cleaning drill nozzle Φ1.3mm
B1305 Cleaning drill nozzle Φ1.6mm
B1307 Drill holder nozzle Φ1.3/1.6mm
B1308 Drill (nozzle Φ0.8mm, qty 10)
B1310 Drill (nozzle Φ1.3mm, qty 10)
B1311 Drill (nozzle Φ1.6mm, qty 10)

Hakko FR-400. Desoldering Tool with Built-in Vacuum Pump 300W

  • Производитель: Hakko
  • Модель: FR-400
  • Наличие: по запросу
  • Цена - по запросу